360-209-4048

Home / Services / Bathroom Services

Bathroom plumbing services.

From a dripping shower head to a failing waste and overflow assembly quietly leaking through your floor, we handle the full range of bathroom plumbing, done right the first time.

Free estimates within 20 miles of Camas, WA  ·  No credit card required
OR CCB 259728  ·  WA MAXWEPL768KO

Five snapshots of bathroom plumbing work by Maxwell Plumbing: brushed nickel and oil-rubbed bronze tub and shower trim, a new shower cartridge beside the old one, a tub being fill-tested, and a new tub drain seen from below

The one people don't see coming

Waste & overflow failures: a second-floor problem.

The waste and overflow assembly is the plumbing behind your bathtub drain stopper: a drain at the bottom of the tub, connected by pipe to an overflow plate on the front wall that keeps the tub from flooding. There are gaskets, seals, and mechanical linkages involved, and when any of them fail, water doesn't go down the drain. It goes into the subfloor.

In a single-story home, that's a crawl space problem. In a two-story home, it's a ceiling, and sometimes drywall, insulation, and structural framing, by the time anyone notices. The damage typically builds slowly, over dozens of baths, before a stain appears or something sags.

We take waste and overflow calls seriously, no matter how minor the symptom looks.

  • Diagnose before we replaceA dripping shower or a failed stopper might be a small part or something more involved. We identify the actual problem before recommending anything, and we tell you what we find in plain terms.
  • We take hidden leaks seriouslyA slow seep behind a tub or under a drain flange can go undetected for a long time. We check carefully, communicate what we see, and won't minimize something that warrants attention, even if it's harder to explain.
  • Clean work, every timeBathroom plumbing means working around tile and finished surfaces. We're careful with what we touch, clean up after ourselves, and leave the space better than we found it.

What we inspect and repair

Every part of the assembly.

#1

Source of hidden bathroom water damage in two-story homes.

Silent

Most leaks cause no visible symptoms until the damage is extensive.

A proper waste and overflow repair addresses every component, not just the one that's visibly failing.

What we check

  • Overflow plate and face gasket
  • Trip lever or push-pull linkage
  • Drain flange and tub shoe
  • P-trap connection and seal
  • Subfloor moisture check where accessible

Worth a look

A soft spot near the tub, a drain that doesn't hold water properly, or an overflow plate that hasn't been touched since the house was built are all worth a look before they become a renovation.

What we do

Bathroom plumbing, the full range.

Waste & overflowOne of the most overlooked sources of serious water damage in a home.
  • Overflow plate gasket replacement
  • Trip lever and linkage repair
  • Drain flange resealing
  • Full waste and overflow assembly replacement
  • Subfloor leak assessment
Shower cartridge & trimThe fix for most shower temperature and pressure problems.
  • Single-handle cartridge replacement
  • Pressure-balancing cartridge service
  • Trim repair kit installation
  • Handle and escutcheon replacement
  • Thermostatic valve cartridge service
Shower heads, drains & moreThe smaller jobs that still matter, done correctly and without a mess.
  • Shower head replacement and upgrade
  • Shower arm and flange replacement
  • Tub and shower drain repair
  • Supply line replacement
  • Angle stop valve replacement
  • Caulk removal and reseal

The most common shower repair

Cartridge replacement. No new valve required.

When a shower runs too hot, won't hold temperature, drips constantly, or loses pressure, the cartridge is almost always the culprit. The cartridge is the internal valve component that controls water flow and temperature. It wears over time, and when it does, the symptoms can range from annoying to unusable.

The good news: in most cases, the valve body in the wall is perfectly fine. We replace the cartridge, at a fraction of the cost of a full valve replacement, and restore the shower to full function. We carry cartridges for Moen, Delta, Kohler, and other common brands, and can typically complete the repair in a single visit.

Trim repair kits are another frequent solution. When the handle, escutcheon plate, or other visible trim is damaged, corroded, or simply dated, a trim kit restores the look and function without touching the valve or the wall.

Good to know: trim kitsMany trim repair kits are designed to work with existing valve bodies. If your valve is sound but the handle is cracked, the plate is corroded, or the finish no longer matches, a trim kit is a clean, cost-effective fix that avoids any tile or wall work.
  • MoenOne of the most common brands in homes across the Pacific Northwest. Moen cartridges are simple to replace and widely available. Moen also offers a lifetime warranty on many fixtures, and we can help you through a warranty replacement if it applies.
  • DeltaDelta's ball-style and cartridge valves are found in a wide range of home builds. We stock common Delta cartridges and seats for quick repairs on both single and multi-handle setups.
  • KohlerKohler valves are well-engineered and durable, but replacing a cartridge means carefully identifying the valve series. We diagnose before we order, so you get the right part, installed correctly, on the first visit.
  • Other brandsPrice Pfister, American Standard, Symmons, and others. If it's a brand we need to source for, we'll identify it, get the right part, and keep you informed on timing. No guesswork.

For property managers

We work with property management teams.

Shower cartridge replacements and trim repair kits are among the most frequent plumbing service calls in rental properties, and they're exactly the kind of job we're set up to handle efficiently. We understand that tenant turnover, vacant units, and maintenance schedules don't always line up neatly, and we work with property managers to get in, get it done, and get out.

Whether you have one unit with a dripping shower or a portfolio of properties with ongoing plumbing maintenance needs, we're happy to build a working relationship that makes the logistics easier on your end.

Fast cartridge turnaroundWe stock common cartridges for Moen, Delta, and Kohler. Most shower cartridge replacements are a single-visit, same-day repair, which keeps disruption to tenants low.
Trim kit expertiseWe identify the correct trim kit for the existing valve, source it, and install it correctly, so the finish matches, the function is restored, and there's no tile or drywall damage to deal with.
Clear communicationWe document what we found, what we replaced, and what to watch. You get a clear picture of the work, useful for maintenance records, owner reporting, or deciding between repair and replacement.

Let's talk about what ongoing bathroom plumbing support looks like for your properties. Call 360-209-4048

In their words

What our neighbors say.

Good questions

Bathroom plumbing answers.

How do I know if my tub has a waste and overflow leak?

Common signs include a soft or spongy subfloor near the tub, discoloration or staining on the ceiling below a second-floor bathroom, a drain stopper that no longer holds water properly, or visible corrosion around the overflow plate. In some cases there are no obvious signs at all, because the leak is slow enough to evaporate or disperse before it shows up. If your bathroom is on the second floor and the waste and overflow assembly hasn't been inspected in years, it's worth a look.

How do I know if my shower needs a new cartridge?

Common signs of a failing cartridge: the shower drips continuously after it's turned off, the handle takes more force than it used to, the water temperature is hard to control or inconsistent, or the shower suddenly runs much hotter or colder than before. Sometimes the cartridge is so worn that the handle spins freely without controlling the flow. Any of these typically points to the cartridge rather than the valve body, which means the fix is simpler and less expensive than you might expect.

Can you replace just the trim without touching the valve?

In most cases, yes. Trim repair kits are designed to work with existing valve bodies, so if the internal valve is in good shape but the handle, escutcheon plate, or trim is damaged or corroded, we can swap in a new trim kit without cutting into the wall or replacing any plumbing. We identify the valve series, source the correct kit, and install it cleanly. It's a cost-effective fix that restores both function and appearance.

My shower head drips after I turn it off. Is that normal?

A brief drip for a few seconds after shutoff is normal. It's just water draining from the head and arm. A drip that continues for minutes or longer typically points to a failing cartridge or valve seat, not a shower head problem, and replacing the shower head won't fix it. We'll diagnose what's actually going on before recommending a repair.

Do you work with property management companies?

Yes. Bathroom plumbing service calls are one of the most common requests we get from property managers. Shower cartridge replacements and trim repair kits in particular are frequent, fast jobs that we're well set up to handle across multiple units or properties. We're happy to talk through what an ongoing maintenance relationship looks like. Give us a call at 360-209-4048.

What areas do you serve?

SW Washington, including Camas, Vancouver, Washougal, and Ridgefield, and the Portland, Oregon metro. Estimates are free within 20 miles of Camas, WA.

Related reading: Are Bidets Worth It? What to Know Before You Install One  ·  Hissing Sound in Your Wall? A Hidden Leak and Mold Story from Camas

Maxwell Plumbing crest: a plumber waving a plunger from a Maxwell van, Serving the Pacific Northwest, Est. 2023

Free estimate, no pressure.

Bathroom problem? Let's fix it.

24/7 emergency service  ·  Based in Camas, WA  ·  OR CCB 259728  ·  WA MAXWEPL768KO