Toilet repair, reset & replacement.
From a rocking toilet to a running one, and everything in between. Honest diagnosis, clean work, and fair pricing across SW Washington and the Portland metro.
Free estimates within 20 miles of Camas, WA · No credit card required
OR CCB 259728 · WA MAXWEPL768KO

Don't ignore this
A rocking toilet isn't just annoying. It's a warning.
Most homeowners assume a wobbly toilet is a minor nuisance. It isn't. Every time a loose toilet rocks, it compresses the wax ring unevenly, and over time that seal breaks down. Once it fails, water can quietly damage your subfloor for months before any visible sign appears.
By the time you notice staining on the ceiling below or soft spots in the bathroom floor, the damage can be significant. Subfloor repairs around a toilet can cost anywhere from several hundred to several thousand dollars, all because a relatively simple reset was put off.
The reset itself is usually simple. We pull the toilet, replace the wax ring, inspect the flange, and reseat everything properly.
- Diagnosis before adviceA running toilet could be a worn flapper or something more involved. We tell you exactly what's happening before we suggest anything.
- Small jobs, taken seriouslyA loose toilet or a silent leak might seem minor. Done right, the small jobs protect you from the expensive ones.
- Four generations deepPlumbing is a family craft for us, and that care shows in every job, even the ones nobody sees.
- Fair, clear pricingYou get a quote before any work begins. No surprise invoices.
What happens when you ignore it
The chain reaction a loose toilet starts.
- 1. The wax ring gets squeezedRocking compresses it unevenly.
- 2. The seal gives outThe wax ring degrades or breaks.
- 3. Water gets under the toiletA little seeps out with every flush.
- 4. The subfloor soaks it upMoisture builds over weeks or months.
- 5. The floor starts to failThe subfloor softens, warps, or rots.
- 6. The flange goes with itIt can crack or sink into the damaged floor.
- 7. Sewer gas gets inGases may enter the home.
- 8. The bill growsWhat was a simple reset becomes a major repair.
What we do
Repair it, reset it, or replace it.
RepairMost toilet problems can be fixed quickly and affordably.
- Running toilet diagnosis and repair
- Flapper and fill valve replacement
- Handle and flush mechanism repair
- Slow flush troubleshooting
- Phantom flush diagnosis
- Condensation and sweating tanks
- Leaks at the base
- Supply line replacement
Reset & reseatA rocking or loose toilet is more urgent than most people realize.
- Toilet removal and reseat
- Wax ring replacement
- Flange inspection and repair
- Shim and bolt replacement
- Base leaks from a failed seal
- Stability check after the reseat
ReplacementA toilet that fits your space, budget, and water use.
- Old toilet removal and haul-away
- New toilet installation
- Water-efficient model upgrades
- Comfort height installations
- Elongated and round bowl options
- Bidet seat and bidet installation
- Flange and supply line inspection

Water and money
A running toilet is costing you more than you think.
200
Gallons a day
What a running toilet can waste.
$100+
Extra a month
What that can add to your water bill.
6,000
Gallons a month
What a silent leak can lose.
20%
Of water bills
The share caused by toilet leaks, on average.
The most wasteful toilet problems are often the quietest. A worn flapper or faulty fill valve can run water into the bowl all day. You won't hear it, but your water meter will. Toilets made before 1994 use 3.5 to 7 gallons per flush, and modern high-efficiency models use as little as 1.28. Upgrading one toilet can save more than 15,000 gallons a year.
Try the dye test
- Take the tank lid off and set it somewhere safe
- Drop food coloring or a dye tablet into the tank
- Don't flush, and wait 15 minutes
- Look in the bowl
Color in the bowl?
That's a silent leak. The flapper isn't sealing, and water is running from the tank to the bowl around the clock. It's one of the most common toilet problems we see, and one of the most fixable. Replacing a flapper typically takes under 30 minutes.
While you're at it
Curious about bidets? We install those too.
If you're already having toilet work done, it's a natural time to consider a bidet seat or a standalone bidet. The installation is simple, and the benefits add up: hygiene, comfort, and less toilet paper.
Bidet seats fit most standard toilets and need a nearby electrical outlet for heated water and seat features. A standalone bidet needs more space and its own plumbing rough-in. We'll help you figure out which fits your bathroom.
Still on the fence? Read our bidet guide.
- Bidet seat (most popular)Replaces your existing toilet seat and connects to the existing water supply and a nearby outlet. Most models have heated water, an air dryer, and a warm seat. No major renovation, and typically installed in under an hour.
- Non-electric bidet attachmentFits between the seat and the bowl. Cold water only, so no outlet is needed. Budget-friendly, easy to install, and a good starting point.
- Smart toilets from Toto and KohlerThe top of the line. Toto's Neorest and Kohler's Numi build a full bidet into a premium toilet, with a heated seat, automatic lid, warm air dryer, deodorizer, and hands-free flushing. Needs an outlet and a standard water connection.
In their words
What our neighbors say.
Good questions
Toilet answers.
My toilet rocks a little. Is that really a problem?
Yes, and it's more urgent than most people think. Even slight rocking puts uneven pressure on the wax ring seal beneath the toilet. Over time that seal breaks down and lets water seep under the floor with every flush. By the time you see damage, the subfloor may already need significant repair. A toilet reset is a small job that prevents a very large one.
How do I know if my toilet has a silent leak?
Do a dye test. Drop food coloring into the tank and wait 15 minutes without flushing. If color appears in the bowl, your flapper is leaking and water is running continuously from the tank to the bowl. A silent leak like this can waste up to 200 gallons a day and show up as a real increase on your water bill. The fix is usually inexpensive.
Should I repair or replace my toilet?
It depends on the toilet's age and condition. Most repairs, like flappers, fill valves, handles, and supply lines, are inexpensive and add years to a toilet's life. A toilet made before 1994 uses 3.5 to 7 gallons per flush, while a modern WaterSense toilet uses 1.28. At that point, replacement often pays for itself in water savings within a few years. We'll give you an honest comparison at the estimate.
How much water does a running toilet waste?
Anywhere from 30 to 200 gallons a day, depending on how bad the leak is. That's up to 6,000 gallons a month, which can easily add $50 to $150 or more to your monthly water bill. Because it often runs silently, many homeowners don't notice until an unusually high bill arrives.
What's involved in a toilet reset?
We shut off the water, disconnect and remove the toilet, inspect the flange for damage, replace the wax ring, and reseat the toilet with new bolts and shims as needed. Then we reconnect the supply line, check for leaks, and confirm the toilet is stable. Most resets take 1 to 2 hours. If the flange is damaged or the subfloor needs attention, we'll let you know before we go any further.
Do you install bidet seats and bidets?
Yes. Bidet seats are one of our more popular add-ons when we're already doing toilet work. Most install in under an hour and need an existing outlet near the toilet. Standalone bidets need a plumbing rough-in and are best added during a remodel. Read our bidet guide if you're curious where to start.
What areas do you serve?
SW Washington, including Camas, Vancouver, Washougal, and Ridgefield, and the Portland, Oregon metro. Estimates are free within 20 miles of Camas, WA.
Related reading: Sump pump vs. ejector pump: what's the difference?
No pressure, just honest work.