Home / Services / Faucets & Sinks
Faucets & sinks, installed with care.
Kitchen and bathroom faucet installation, sink replacement, and repair across SW Washington and the Portland metro. Done cleanly, correctly, and without the guesswork.
Free estimates within 20 miles of Camas, WA · No credit card required
OR CCB 259728 · WA MAXWEPL768KO

Why it matters
A faucet or sink done right stays right.
A faucet install sounds simple, until it isn't. The wrong supply line connection, a missed shutoff valve issue, or a sink that wasn't properly sealed can quietly cause water damage for months before you notice it.
We treat every faucet and sink installation with the same care we'd give a full repipe. That means checking the shutoffs, inspecting the supply lines, seating the sink correctly, and leaving the job the way a homeowner would want it.
A well-installed faucet lasts 10 to 20 years on average, and the installation matters as much as the product. A $400 faucet installed poorly will fail before a $150 one installed correctly.
- Honest from the startWe'll tell you if a repair makes more sense than a replacement, even when a new faucet is more profitable for us.
- Clean, careful workWe protect your surfaces, clean up completely, and double-check every connection before we leave.
- Four generations deepPlumbing is a family craft for us, and that attention to detail shows in even the small jobs.
- Your faucet or oursAlready picked one out? We'll install it. Not sure yet? We'll help you choose for your sink, style, and budget.
What we do
Faucet and sink services, start to finish.
Kitchen faucetsSingle handle, pull-down, pull-out, and commercial-style.
- New faucet installation
- Old faucet removal
- Supply line replacement
- Leak diagnosis and repair
- Sprayer and cartridge repair
- Low pressure troubleshooting
- Shutoff valve service
Bathroom faucets & sinksFaucets, vessel and pedestal sinks, and vanity installs, properly sealed.
- Faucet replacement and installation
- Vessel and pedestal sink installation
- Vanity top and basin swaps
- P-trap and drain assembly
- Pop-up repair and replacement
- Overflow and stopper repair
- Slow drain diagnosis
- Shutoff valve replacement
Sink replacementUndermount and drop-in sinks for kitchens and bathrooms.
- Undermount sink installation
- Drop-in sink replacement
- Farmhouse and apron sinks
- Granite and stone sink support
- Silicone sealing and caulk
- Drain and disposal hookup
- Full kitchen sink swaps
A quick brand guide
Moen, Delta, or Kohler?
Moen
Best warranty
Moen's lifetime limited warranty is one of the best in the industry. Finishes hold up well over time, and parts are widely available, which matters for repairs down the road.
Best for: long-term homeowners, rental properties, and anyone who wants peace of mind on warranty coverage.
Delta
Most reliable cartridge
Delta's ceramic disc cartridges are exceptionally durable, with far fewer drips and valve failures than older ball or compression designs. Touch2O and their other smart features are well done if you want them.
Best for: busy kitchens, families who want something that just works, and anyone interested in touch or voice-activated options.
Kohler
Design-forward
Kohler puts more emphasis on looks, with a broader, bolder lineup that tends to lead on finishes and shapes. Quality is excellent, though parts can be slightly harder to source years down the line.
Best for: remodels, design-forward kitchens and baths, and homeowners who want the faucet to make a statement.
All three are excellent. The difference comes down to your priorities, your sink configuration, and how long you plan to stay. Already have a faucet picked out? Great, we'll install it.
In their words
What our neighbors say.
Good questions
Faucet and sink answers.
Should I repair my faucet or replace it?
It depends on the faucet's age, the condition of the finish, and what's actually wrong. Cartridge or O-ring replacements are inexpensive and can extend the life of a good faucet by years. If the faucet is older than 10 to 15 years, has visible finish wear, or the parts are hard to source, replacement usually makes more sense. We'll give you an honest read at the estimate.
Can I supply my own faucet for you to install?
Absolutely. We install customer-supplied fixtures all the time. Just make sure the faucet matches your sink's hole configuration (the number of holes, spacing, and size) and we'll take care of the rest. If you're not sure, send us the measurements and we can help you choose before you buy.
How long does a faucet installation take?
Most faucet swaps take 45 minutes to an hour and a half. If the shutoff valves are corroded, the supply lines need replacing, or there are complications under the sink, it can take a bit longer. We'll let you know up front if anything looks like it will add time.
What's involved in replacing an undermount sink?
Undermount sinks are bonded to the underside of the countertop with adhesive and clips. Replacing one means carefully removing the old sink without damaging the stone or laminate, cleaning the mounting surface, setting and securing the new sink, re-sealing with silicone, and reconnecting the drain and disposal if there is one. It's more involved than a drop-in swap, typically 2 to 4 hours depending on the sink and countertop material.
My faucet drips. Is that a big deal?
A dripping faucet wastes more water than most people realize. A slow drip can add up to thousands of gallons a year. It's also usually a sign of a worn cartridge or O-ring, which is an inexpensive fix. Left alone, the internal damage can spread and eventually call for a full replacement, so it's worth fixing sooner rather than later.
What areas do you serve?
SW Washington, including Camas, Vancouver, Washougal, and Ridgefield, and the Portland, Oregon metro. Estimates are free within 20 miles of Camas, WA.
Related reading: What Should Your Home's Water Pressure Be? (45 to 60 PSI)
No pressure, just honest work.